Reconstruction plate
Straight plate with holes is suitable for fracture fixation of straight bones, hollow bones and the collar bone. It is possible to shape the plate before using so that it would copy the anatomical shape of the bone better. Use the plate only is places where you can presume low weight.
Reconstruction plate thick
This plate has the same indication as reconstruction plate but it is thicker and from this reason it is suitable for heavier patients and bone fractures where medium and higher weight can be expected. In the areas of higher strain, use some of the plates using screws of 5 mm. It is possible to shape the plate before using so that it would copy the anatomical shape of the bone better.
To these angularly stable plates we supply self-tapping locking screws with diameters 3,5 mm and 3,5/2,7 mm.
The implants are made of implant steel ISO 58321E or Titanium Ti6Al4V ELI ISO 5832-3.
Angularly stable plates
The system is based on the principle of the inner fixator. By means of the tight connection "screw-plate", the angularly stable connection is achieved between the plate and the bone. This transfers part of the weight from the screw-bone connection to the screw-plate connection. Thanks to that it is possible to use the system successfully even in a less quality and an osteoporotic bone.
If the angularly stable plate is used with locking bone screws, the plate and the screws make tight system together. The plate does not have to be pushed against the bone therefore the bone still gets sufficient supply of the blood. Locking bone screws can be introduced monocortically without enfeebling the strength of the configuration or the fracture fixation, because the screws are firmly anchored in the plate.